03-97955964, 0428-384159
Contact
lyles-waterbeds-logo
Waterbed Service Excellence shipping Australia wide

Waterbed Heaters Sales and Service Melbourne.

The Only brand Available with EMF Shielding And Fully Earthed.

Fully Approved for Use in Australia. They Test Well Above The Standards Set For Electrical Product Safety.

The optimum heating system for every waterbed, with TÜV-GS-certified safety and EMC and EMF certification for bio-compatibility.

Latest carbon technology for maximum energy efficiency, paired with recyclable materials for a clean environment.

Carbon Classic 25 to 35 Degree. Carbon Digital IQ 24 to 36 Degree. The IQ defaults to 28c in the event of a power failure.
Areas that have frequent power interruptions. The Classic would be the better choice.

240 watt for all Soft Sided Waterbeds, Single and Dual Bladder
320 watt for all Timber Frame Waterbeds, Can be used in Queen and King Soft Sided beds

Calesco Digital Waterbed Heater 24 to 36 Degree
250 Watt for all Soft Sided Waterbeds Single and Dual bladders. Also Timber Frames up To Queen Size

Installation Service Available Melbourne Metro & Surrounding Suburbs. Pick-Up In Noble Park North or Free Delivery Australia Wide.

Same Day Shipping if Ordered by 2pm. After 2pm Next day.

Waterbed Heater Guide.

Generally speaking, Your Waterbed heater should never be set below 25c. At this low temperature, the vinyl water mattress is more likely to develop stress fractures in the areas that flex the most. The cooler the vinyl is the harder it becomes.

At 25c The waterbed is considered to be slightly cool to neutral. If you find that your bed is around 25c or under. It is a sign that your Doona or bedding is hotter than what would be optimum for the best balance of temperature both above and below you. Or your bedroom's temperature at night is far warmer than it needs to be for getting the best rest possible.

It takes a change of around 2 degrees in temperature for most people to detect the change in the waterbed. So I suggest 27c as a good starting temperature as it is just noticeably warmer than 25c. Then adjust the thickness of your bedding to suit.

We use a Doona that has 2 parts, 1 thin & 1 Medium that joins together making it thick. Providing 3 variations. Light for summer, thick for winter and medium for in between.

During summer, If we experience 26-28c during the night for a week or two. The bed gets turned down to 25c for the duration. Ceiling fans are a great help on those hot nights.

In the coldest part of winter, it gets down to around 1c outside here in Melbourne. And the waterbed heater gets reset to 29-31c

If you are having trouble with your bed being either too hot or too cold and just can't seem to find the right temperature. Usually, that is a symptom of insufficient insulation between you and the water mattress. Time for a new woolen overlay.

Having your waterbed a bit to warm can result in restless sleep, As your body tosses and turns trying to cool itself

I always say, When Your waterbed is at its best you get 8 hours worth of sleep in 6.5

Questions or Advice Call Lyle 03-9795-5964.
I Love My Waterbed, Its The Best, I Make Sure Yours is Too!
Copyright © 2020 Lyles Waterbeds.  ABN 19 967 351 229